Top Office Machine Types

Top Office Machine Sites
What are you shopping for?

Qsc Audio Products QSC ISA 300 Ti Amp Power

Qsc Audio Products QSC ISA 300 Ti Amp Power

Consumer Rating : Rating : /5
Price Range : $633.00 - $633.00

Designed as a cost-effective solution specifically for sound contractors, the versatile loading options and a comprehensive feature set make the ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Unique among distributed sound power amplifiers, the "Ti" series will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers to be attached to the same amp that is powering the main sound system. The ISA 300Ti is rated at 185 watts RMS per channel into 8 ohms, 280 into 4 ohms (20 Hz-20 kHz, 0.1% THD). 2 ohm load rating is 430 watts RMS per channel (1 kHz, 1% THD). Bridged mono output produces 600 watts RMS into 8 ohms, 830 into 4 ohms (1 kHz, 1% THD). 70V rated output is 300 watts RMS per channel (50 Hz-16 kHz, 0.5% THD).		Merchant Offers
Sweetwater$633.00 QSC ISA 300 Ti (70V 300W Power Amp)
eBay$633.00 Qsc Isa 300 Ti (70v 300w Power Amp)
eBay$633.00 Qsc Isa300ti Power Amplifier
eBay$633.00 Qsc Isa 300 Ti (70v 300w Power Amp)
eBay$633.00 Qsc Isa300ti 2 Channel 185 Watt Amplifier
Amazon Marketplace$633.00 QSC ISA 300Ti 70V Dual Channel Amplifier



QSC ISA 300 Ti (70V 300W Power Amp)

QSC ISA 300 Ti (70V 300W Power Amp)


QSC designed the ISA 300Ti as a cost-effective solution specifically with sound contractors in mind. The ISA 300Ti can drive both eight and four ohm loads and a distributed system on the same channel at the same time, allowing you to reduce the number of amplifier channels needed to power the speakers from the same amp. This rugged power amp can output 25, 70, or 100 volt to accommodate distributed audio systems, making this the perfect power amp for countless installed in-ceiling systems. Add QSC sound quality to your system with the ISA 300Ti!QSC ISA 300Ti Power Amp at a Glance:Unique load dispersionI/OSpeaker protectionUnique load dispersionUnique among distributed sound power amplifiers, the "Ti" versions will drive eight or four ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers to be attached to the same amp as is powering the main sound system. I/OA power amp has to be able to withstand daily use and abuse, and it must also be equipped with a wide variety of input and output options. The ISA 300Ti easily handles both. Housed in a rugged 3-U chassis, all ISA models feature rear panel gain controls for tamper resistant operation with 2dB detents for quick and repeatable settings. Inputs include both XLR and detachable Euro-style connectors, and outputs feature covered barrier strip connectors for safety agency compliance. For added versatility, a DataPort V2 (Version 2) terminated with an HD-15 connector is provided for use with DPV2-compatible signal processing accessories such as the XC-3 Crossover, SF-3 Subwoofer Filter, LF-3 Low Frequency Filter and the DSP-3 with external power supply.Speaker protectionAny live sound engineer can tell you about the importance of protecting your speakers while maintaining the integrity of the performance. Selectable high-pass filters are included to protect speakers and prevent speaker transformer saturation with minimal effect on program material. The ISA Series provide additional protection circuitry including DC, infrasonic, thermal overload, RF and short circuit protection.QSC ISA 300Ti Power Amp Features:Low-impedance and isolated 25, 70, and 100 volt outputs for distributed audio systemsRear panel gain controls with 2dB detents for quick and repeatable settingsXLR and detachable Euro style input connectorsDataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)Independent defeatable clip limiters for reduced distortion50 Hz or 75 Hz selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program materialFront panel indicators include power, signal, and clipCovered barrier strip output connectors for safety agency complianceAutomatic variable-speed fan for quiet normal operation with maximum cooling on demandRear-to-front air flow keeps equipment racks coolStereo, Bridge, or Parallel operating modesComprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection3-year warranty plus optional 3-year extended service contract25, 70, 100 volt, and low-impedance outputs available simultaneouslySimple barrier strip connection determines output modePremium QSC sound with the ISA 300Ti!
more at Sweetwater		Sweetwater
store rating : 4.22		Only $633.00
Compare prices
Qsc Isa 300 Ti (70v 300w Power Amp)

Qsc Isa 300 Ti (70v 300w Power Amp)


New with Full Manufacturer Warranty! 2 x 280W at 4 Ohms, Also Has 25, 70, and 100 Volt Outputs and Simultaneous Low Impedance Outputs QSC designed the ISA 300Ti as a cost-effective solution specifically with sound contractors in mind. The ISA 300Ti can drive both eight and four ohm loads and a distributed rig on the same channel at the same time, allowing you to reduce the number of amp channels needed to power the speakers from the same amp. This rugged power amp can out 25, 70, or 100 volt to accommodate distributed audio systems, making this the perfect power amp for countless installed in-ceiling systems. Add QSC sound quality to your rig with the ISA 300Ti! QSC ISA 300Ti Power Amp at a Glance: Speaker protection I/O One-of-a-kind load dispersion One-of-a-kind load dispersion One-of-a-kind among distributed sound power amps, the "Ti" versions will drive eight or four ohm loads and a distributed rig on the same channel at once. This enables a contractor to reduce the number of required amp channels by allo
more at eBay		eBay
store rating : 3.87		Only $633.00
Compare prices
Qsc Isa300ti Power Amplifier

Qsc Isa300ti Power Amplifier


QSC ISA300TI Power Amplifier, 185 W/Ch, 70v, ISA-300TI BRAND NEW - Unopened item. Full Manufacturer Warranty Hassle Free 30 Day Returns Click here to check real time stock and possible LOWER prices! ISA300TI Designed as a cost-effective solution specifically for sound contractors, the ISA Series features seven models including four low impedance models (ISA 280, ISA 450, ISA 750) rated for 2-ohm operation, and three "Ti" versions with isolated 25, 70 and 100 volt outputs for distributed audio s
more at eBay		eBay
store rating : 3.87		Only $633.00
Compare prices
Qsc Isa 300 Ti (70v 300w Power Amp)

Qsc Isa 300 Ti (70v 300w Power Amp)


NEW with FULL WARRANTY 2 x 280W at 4 Ohms, Also Has 25, 70, and 100 Volt Outputs and Simultaneous Low Impedance Outputs QSC designed the ISA 300Ti as a cost-effective solution specifically with sound contractors in mind. The ISA 300Ti can drive both eight and four ohm loads and a distributed system on the same channel at the same time, allowing you to reduce the number of amplifier channels needed to power the speakers from the same amp. This rugged power amp can output 25, 70, or 100 volt to accommodate distributed audio systems, making this the perfect power amp for countless installed in-ceiling systems. Add QSC sound quality to your system with the ISA 300Ti! QSC ISA 300Ti Power Amp at a Glance: Unique load dispersion I/O Speaker protection Unique load dispersion Unique among distributed sound power amplifiers, the "Ti" versions will drive eight or four ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by al
more at eBay		eBay
store rating : 3.87		Only $633.00
Compare prices
Qsc Isa300ti 2 Channel 185 Watt Amplifier

Qsc Isa300ti 2 Channel 185 Watt Amplifier


This auction is for one QSC ISA300Ti Amplifier with 2 channels,185 watts/ch at 8 , 280 watts/ch at 4 , 430 watts/ch at 2 , 300 watts/ch at 70V .Shipping is Free in the lower 48 states.Please contact for a quote to any other location.Authorized QSC Dealer If you have any questions feel free to call us toll free in the US at 877-988-3688 or e-mail us at alanpattillo@musicalleyonline.com The ISA Series Designed as a cost-effective solution specifically for sound contractors, the ISA Series feature
more at eBay		eBay
store rating : 3.87		Only $633.00
Compare prices
QSC ISA 300Ti 70V Dual Channel Amplifier

QSC ISA 300Ti 70V Dual Channel Amplifier


The ISA 300Ti by QSC is rated at 185 watts RMS per channel into 8 ohms, 280 into 4 ohms (20 Hz-20 kHz, 0.1% THD). 2 ohm load rating is 430 watts RMS per channel (1 kHz, 1% THD). Bridged mono output produces 600 watts RMS into 8 ohms, 830 into 4 ohms (1 kHz, 1% THD).
more at Amazon Marketplace		Amazon Marketplace
store rating : 2.77		Only $633.00
Compare prices
Power by shopping.com
Tag : , , , , , , , ,
What are you shopping for?

All Right Reserved By OfficeMachinePrice.com Find, Compare and Buy All Your Cheapest Office Machine Here.